Nidatech - Pipetting Workstation

Liquid handling at it's Best

Download Brochure
Click to get Adobe^®Reader

Pipetting Workstation

	Very fast and convenient filling of plates, tubes, etc.
	Light handle and very low activation force
	Very flexible - performs a variety of pipetting functions
	Single channel pipetting
	Multi channel dispensing
	Connect to reservoir - avoid constant aspiration
	Full logging and printing available

Unique pipetting workstation
The LiquiMaster^™ Workstation is a unique combination of a pipette and a peristaltic pump, aimed at easing all your serial pipetting work. By combining a light weight pipette with a very precise pump and a programmable electronic controller, it takes almost all physical strain out of routine pipetting task and allows you to work significantly faster than before.

Fast -
Since the LiquiMaster is fully programmable, a full series of any number of plates or tubes can be filled with just one light press of the pipettes activation button.

96-well plates: Fill 45 plates in 15 minutes!
10 ml tubes: Fill 35 tubes per minute!

- and flexible
Perform standard pipetting, serial dilutions, multi dispensing or multi-sampling. Or use the LiquiMaster to deliver a calibrated flow to feed an incubator.

-or automatic

Combining the LiquiMaster pump with the Mini Robot allows you to fill 96-well or 384-well plates fully automatic, without using muscle power for filling.

Fill 96-well plates in 10 seconds
Fill 384-well plates in 40 seconds

Extremely light
The short pipette weighs only 70 g and the force needed to push the button that controls the whole operation is only 7 g. Since the pipette is connected to a reservoir bottle, there is no need to constantly move back and forth between aspiration and dispensing.
Pipetting has never been easier for your arm and hand..!

Single or multi-channel dispensing
The pipette is available in a single-channel version for use with pipette tips or as a 8 channel dispenser for faster work with micro-plates. Both versions are fully autoclavable, as is the silicon tubing for the pump.

Since the pump used is a peristaltic pump, it is easy to set up a completely sterile system, for instance for dispensing media.

Logging and printing
LiquiMaster is equipped with a log in which all set-up parameters, calibration results and pipetting functions are registered.